John Deere 4045TF285 4.5L Generator Drive Engine

Browse Inventory »

Easy, Affordable Financing Available NOW!

Apply Now

All Product Lines / John Deere Products / Engines and Drivetrain / Generator Drive Engines / Standby Power / Tier 3 and Lesser Regulated / 4045TF285 4.5L Generator Drive Engine

4045TF285 4.5L Generator Drive Engine Model Photo

Features
Specs

Features

2-valve cylinder head

Cross-flow head design provides excellent breathing from a lower-cost 2-valve cylinder head

High-pressure common-rail (HPCR) and engine control unit (ECU)

The HPCR fuel system provides variable common-rail pressure, multiple injections, and higher injection pressures, up to 1600 bar (23,000 PSI). It also controls fuel injection timing and provides precise control for the start, duration, and end of the injection

Fixed geometry turbocharger

Fixed geometry turbochargers are precisely matched to the power level and application

Turbocharged

In turbocharged engines, the air is pre-compressed. Due to the higher pressure, more air is supplied into the combustion chamber allowing a corresponding increase in fuel injection which results in greater engine output

Multiple injection strategy

The new HPCR fuel system and engine control unit (ECU) allow for multiple fuel injections. The number of fuel injections, based on speed and load, help contribute to lower combustion temperatures, which reduce the formation of NOx and particulates. The multiple injection strategy also provides an added benefit of noise reduction

John Deere electronic engine controls

Electronic engine controls monitor critical engine functions, providing warning and/or shutdown to prevent costly repairs and eliminate the need for add-on governing components, all lowering total installed costs.

Compact size

Mounting points are the same as Tier 2/Stage II engine models

Engine performance

Block loading capability provided with standard electronic governor control

Additional features

Self-adjusting poly-vee fan drive
Forged-steel connecting rods
Replaceable wet-type cylinder liners
Either-side service
500-hour oil change

Emissions Certifications

EPA Tier 3

General engine data

Model	4045TF285
Number of cylinders	4
Displacement-- L (cu in)	4.5 (275)
Bore and Stroke-- mm (in)	106 x 127 (4.17 x 5.00)
Compression Ratio	19.0:1
Engine Type	In-line, 4-Cycle
Aspiration	Turbocharged
Length - mm (in)	860 (33.9)
Width-- mm (in)	612 (24.1)
Height-- mm (in)	1039 (40.9)
Weight, dry - kg (lb)	491 (1083)

Performance data range

Hz (rpm)	60 ( 1800 )
Generator Efficiency %	88-92
Power Factor	0.8
Engine power - Prime kW	67
Engine power - Prime hp	90
Engine power - Standby kW	74
Engine power - Standby hp	99
Rated Fan Power - kW	5.2
Rated Fan Power - hp	7
Calculated generator set output - Prime kWe	54-57
Calculated generator set output - Prime kVA	68-71
Calculated generator set output - Standby kWe	61-63
Calculated generator set output - Standby kVA	76-79

Central Jersey Equipment is committed to your privacy. For more information view our Privacy Statement