John Deere BP15 Belt Pickup Platform
Search Inventory    Search Products & Site
Easy, Affordable Financing Available NOW!
BP15  Belt Pickup Platform Model Photo

 

Features

Fly through windrows and capture more crop

X Series Combine with BP15 X Series Combine with BP15

John Deere Combines increase capacity in tough canola and other windrow crops; don’t limit this extreme performance by pairing it with a different belt pickup. No matter what crops or conditions you face, including thick canola, blown crop, or uneven windrows, the BP15 helps you put more grain in the tank while you cover more acres per day.

  • Pick up 30 acres (12.1 ha) of wheat and 25 acres (10.1 ha) of canola windrows per hour with a John Deere X Series Combine and BP15 – The wider feeder house opening with adjustable feed auger flighting and tines enables higher productivity than the S790 Combine with the 615P Belt Pickup.
  • Reduce slug feeding and the chance of plugging – Increase feed auger speed by 20 percent (compared to the 615P) with a two-speed auger drive sprocket for canola and high-yielding wheat. Or, use the slower speed feed rate for less bulky crops like cereals and grass seed. A feed auger spacer keeps the position of the auger at maximum height when harvesting large windrows.
  • Send grain into the feeder house – The windscreen and a factory-installed crop shield move free grain into the tank, reducing the amount of debris on  the feeder house or hitting the windshield while reducing grain loss over the backsheet by up to 0.1 bu/acre in canola.
  • Handle large windrows without slowing down – Reduce plugging in large windrows with a heavy-duty clutch located at the auger rather than the platform back shaft. In the rare case of a plug, take care of it without leaving the cab with the hydraulic reverser. The removal system automatically activates when the feeder house is reversed and delays the belt engagement. The belt delay feature is exclusive to John Deere.

Improve ground following in rough field conditions

X Series Combine with BP15 X Series Combine with BP15

Even the flattest-looking fields have hidden dips, ruts, and ditches that can rob you of valuable grain. The John Deere BP15 makes easy work of uneven areas by picking up crop other belt pickups would leave behind.

  • Set gauge wheels without tools – 20-in. (50.8-cm) gauge wheels are larger than John Deere’s previous  615P Belt Pickup. You can easily adjust the height to raise them in fluffy canola or lower them in cereals.
  • Glide smoothly through rough fields  – Reduce bouncing during harvest and transport with an exclusive John Deere FieldGlide™ suspension system. The system features a simple-to-set, adjustable air spring, and heavy-duty hydraulic shock, letting you increase harvest speed without bouncing over windrows.
  • Maintain consistent height, even in changing terrain – Gauge wheel height sensors on the BP15 let you harvest faster while maintaining a constant operating height in different terrains to reduce missed crop.

Key Specs

Total picking width 4.55 m
14.9 ft
Header height control Electrohydraulic
Number of fingers per belt 84 center belts
77 outer belts
Auger diameter 66 cm
26 in.
Auger fingers Steel with breakaway notch
Diameter: 15.9 mm
0.625 in.

Header

Transport widths 5.35 m
17.5 ft
Header height control Electrohydraulic

Pickup Belts

Width of belts 1.13 m
3.7 ft
Number of belts per pickup Four picking, four transfer
Total picking width 4.55 m
14.9 ft
Operating speed of belts 3-150 m/min
10-475 fpm
Number of rollers Two picking, two transfer

Pickup Fingers

Type Plastic
Number of fingers per belt 84 center belts
77 outer belts

Auger

Float range 57 mm
2.25 in.
Diameter 66 cm
26 in.
Auger fingers Steel with breakaway notch
Diameter: 15.9 mm
0.625 in.
Number of auger fingers 19 STS, maximum 22
Auger finger pattern In-line, retracting
Finger reach 152 mm
6 in.
Operating speed At 520 feederhouse speed: 15t: 180 rpm
18t: 216 rpm

Tires

Adjustment Toolless
Pressure 1 bar
103.4 kPa
15 psi

Crop deflector

Crop deflector Factory installed

Weight

Approximate shipping weight (includes shipping skids) 1647 kg
3630 lb

Additional information

Date collected 15 June 2020

Central Jersey Equipment is committed to your privacy. For more information view our Privacy Statement