John Deere H160 Loader
Search Inventory    Search Products & Site
Easy, Affordable Financing Available NOW!
H160  Loader Model Photo

 

Features

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Quik-Park™ loader mounting system

Quik-Park loader mounting system Quik-Park loader mounting system

The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

To view a video of how the Quik-Park™ system works click here.

NOTE: This video only shows the dismount and mount of the loader without disconnecting the hydraulics. To completely remove the loader, the operator must turn the tractor off, relieve the hydraulics, and then disconnect the hoses from the couplers.

Key Specs

Maximum lift height (A) 2284 mm
90 in.
Lift capacity at full height Measured at pivot (U)
617 kgf
1360 lbf
Measured at 500 mm ahead of pivot (V)
453 kgf
999 lbf
Boom breakout force Measured at pivot (Y)
1295 kgf
2855 lbf
Measured at 500 mm ahead of pivot (Z)
922 kgf
2032 lbf
Bucket rollback force capacity At ground-level line (ZZ)
1188 kgf
2619 lbf
Clearance at full height - bucket dumped (C) 1743 mm
68.6 in.
Dump angle, degrees (E) 43 degree (angle)
Rollback angle, degrees (G) 25 degree (angle)

Tractor

Model 3120/3320/3520/3720
Front tire 7.00-14 6PR R1
Rear tire 11.2-24 6PR R1
Front axle configuration
Wheelbase 1727 mm
68 in.
Pump capacity 8.6 gpm
Rated pressure 2500 psi

Loader

Base weight 257.21 kg
Leveling configuration
Bucket used
Bucket weight 93.8 kg
206.8 lb
Lift capacity at full height Measured at pivot (U)
617 kgf
1360 lbf
Measured at 500 mm ahead of pivot (V)
453 kgf
999 lbf
Lift capacity at 59 in. (1500 mm) Measured at pivot (W)
771 kgf
1700 lbf
Measured at 500 mm ahead of pivot (X)
595 kgf
1312 lbf
Boom breakout force Measured at pivot (Y)
1295 kgf
2855 lbf
Measured at 500 mm ahead of pivot (Z)
922 kgf
2032 lbf
Bucket rollback force capacity At maximum height (VV)
1205 kgf
2657 lbf
At 59-in. (1500-mm) lift height (XX)
1518 kgf
3347 lbf
At ground-level line (ZZ)
1188 kgf
2619 lbf
Dimensions Maximum lift height (A)
2284 mm
90 in.
At full height - bucket level(B)
83.5 in.
2123 mm
At full height - bucket dumped (C)
1743 mm
68.6 in.
Overall length (I+F), ft (m) 3.122 m
10.24 ft
Overall height in carry position (J)
Digging depth (H) 76 mm
2.9 in.
Reach At maximum height (D)
773 mm
30.4 in.
At ground level - bucket level (F)
1381 mm
54.4 in.
Bucket angle Dump angle, degrees (E)
43 degree (angle)
Rollback angle, degrees (G)
25 degree (angle)
Cycle times Loader raise, seconds
2.76 seconds
Loader lower, seconds
1.69 seconds
Bucket dump, seconds
2.91 seconds
Bucket rollback, seconds
1.72 seconds

Additional information

Date collected

Central Jersey Equipment is committed to your privacy. For more information view our Privacy Statement