John Deere 300R Loader
Now Hiring Call Today!
Central Jersey Equipment, NJ
Search Inventory    Search Products & Site
      My CJE Login button
Central Jersey Equipment, NJ
Columbus
(609) 288-6637
2885 Route 206 South, Bldg. 4
Columbus, NJ 08022
Call Us
Directions
Elmer
(856) 358-2880
670 Route 40
Elmer, NJ 08318
Call Us
Directions
Marlboro
(732) 938-6677
65 State Route 34 unit 1
Marlboro, NJ 07746
Call Us
Directions
Hammonton
(609) 704-9440
100 US Route 206
Hammonton, NJ 08037
Call Us
Directions
Columbia
(908) 362-6916
228 Route 94
Columbia, NJ 07832
Call Us
Directions
Browse Inventory »
JD Parts »
Easy, Affordable Financing Available NOW!
Apply Now
All Product Lines / John Deere Products / Compact Construction / Front End Loaders For Tractors / 300R Loader
300R Loader Model Photo

 

Features

Quik-Park™ loader mounting system

Quik-Park loader mounting system Quik-Park loader mounting system

Quik-Park™ equipped loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

End-of-pin lubrication means easy maintenance

Close up of grease fitting Close up of grease fitting
Pivot point grease fitting locations Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. There is no more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Key Specs

Maximum lift height 2284 mm
90 in.
Lift capacity at full height Measured at pivot
617 kg
1360 lb
Measured at 500 mm ahead of pivot
453 kg
999 lb
Boom breakout force Measured at pivot
1295 kg
2855 lb
Measured at 500 mm ahead of pivot
922 kg
2032 lb
Bucket rollback force capacity At ground-level line
1188 kg
2619 lb
Clearance at full height - bucket dumped 1743 mm
69 in.
Dump angle, degrees 43 degree (angle)
Rollback angle, degrees 25 degree (angle)

Tractor

Model 3120/3320/3520/3720/3033R/3039R/3046R
Front tire 7.00-14 6PR R1
Rear tire 11.2-24 6PR R1
Front axle configuration
Wheelbase 1727 mm
68 in.
Pump capacity 8.6 gpm
Rated pressure 2500 psi

Loader

Base weight 257.21 kg
Leveling configuration
Bucket used
Bucket weight 93.8 kg
207 lb
Lift capacity at full height Measured at pivot
617 kg
1360 lb
Measured at 500 mm ahead of pivot
453 kg
999 lb
Lift capacity at 59 in. (1500 mm) Measured at pivot
771 kg
1700 lb
Measured at 500 mm ahead of pivot
595 kg
1312 lb
Boom breakout force Measured at pivot
1295 kg
2855 lb
Measured at 500 mm ahead of pivot
922 kg
2032 lb
Bucket rollback force capacity At maximum height
1205 kg
2657 lb
At 59-in. (1500-mm) lift height
1518 kg
3347 lb
At ground-level line
1188 kg
2619 lb
Dimensions Maximum lift height
2284 mm
90 in.
At full height - bucket level
2123 mm
83.5 in.
At full height - bucket dumped
1743 mm
69 in.
Overall length 3.122 m
10.24 ft
Overall height in carry position
Digging depth 76 mm
2.9 in.
Reach At maximum height
773 mm
30.4 in.
At ground level - bucket level
1381 mm
54.4 in.
Bucket angle Dump angle, degrees
43 degree (angle)
Rollback angle, degrees
25 degree (angle)
Cycle times Loader raise, seconds
2.76 seconds
Loader lower, seconds
1.69 seconds
Bucket dump, seconds
2.91 seconds
Bucket rollback, seconds
1.72 seconds

Additional information

Date collected

Central Jersey Equipment is committed to your privacy. For more information view our Privacy Statement